Need to know how much paint you'll need to repaint a part on your bike? Reference the information below. Don't forget you need to purchase the equivalent amount all the way across, this means that you will need 3 cans of clear coat to go along with those 3 cans of base, and if primer is needed you would need ... you guessed it, 3 as well.
Note: This references parts that need to be completely repainted, if you are touching up areas on these parts you will most likely use less paint.
Cruiser Full Dresser - 2 Quarts
Saddle bag: 2 Aero each / 1 Pint for both
Trunk: 2-3 Aero / pint
Fairing Kit: 3 Aero minimum / Pint minimum
Fender: 1-2 Aero / ½ pint
Leg Shield: 1 Aero
Side Cover: 1 Aero (will have paint left over)
Standard Cruiser: (3 Parts) 1 Quart
Tank: 2-3 aero / pint
Fender: 2 aero for rear, 1 aero for front / 1 pint for both
Larger Fenders: 2 aero front & 2 aero rear / 1 pint total
Sports Bike: 1 Quart
Tail: 1 Aero
Gas Tank: 2 Aero / ½ pint
Fairing: (3 pieces- Upper, Belly Pan, Side): 2 aero each part / 1 pint and a ½ pint
Still unsure? Send us a photo!